Aerial Work PlatformsTruck-Mounted CranesMunicipal & Cleaning EquipmentTruck Bodies & TrailersHydraulic PartsHandling & Lifting EquipmentWe supply and build — we do not rent12-month warrantyAuthorised global agenciesManufactured in RiyadhAerial Work PlatformsTruck-Mounted CranesMunicipal & Cleaning EquipmentTruck Bodies & TrailersHydraulic PartsHandling & Lifting EquipmentWe supply and build — we do not rent12-month warrantyAuthorised global agenciesManufactured in Riyadh
Riyadh · Saudi ArabiaWe manufacture & supply — we do not rent
Golden Quality Industrial Company
We fabricate steel build-ups on trucks and supply hydraulic equipment from manufacturers we officially represent.
We take a bare chassis and hand back a working, painted, tested vehicle — from an insulated platform on a medium-voltage network, to a refuse compactor for a municipal contract, to a crane and cargo body.
We are a manufacturer and supplier — not a rental company
Most of what appears in search results for this equipment is hired by the hour or the day. We do not do that: we build the unit on your chassis, or supply it mounted and ready, and it becomes your asset under your plates and livery.
What we do
Fabrication and mounting of steel build-ups on your truck chassis at our Riyadh workshop
Supply and sale of equipment from our global agencies — full ownership with a tax invoice
Building to the tender document and client specification, clause by clause
12-month warranty, spares and technical support for the machine's whole service life
Paint in your livery, with reflective marking and regulation bumpers
What we do not do
Daily or monthly equipment hire
Operated hire with our own crews
Lifting contracts or hourly services
Commercial substitute parts on safety-critical components
If your project needs a machine for a week, hiring suits you better. If you hold an ongoing contract or a fixed daily route, ownership pays for itself within months — and that is what we build with you.
03What we do
An agency house and a build-up workshop
Our first line is equipment supply from manufacturers we officially represent in the Kingdom: COMET platforms from Italy, TADANO and HC Industrie cranes, and PTOs and hydraulic components from OMFB, Bezares, ABER and Interpump.
Our second line is manufacturing itself: sub-frame, cargo body or tipper or tank, equipment mounting, PTO and hydraulic set-up, paint in your livery, and bumpers and reflective marking to traffic regulations.
Tender review and clause-by-clause compliant offers
Net payload and axle load calculated before fabrication
Spare parts and support for the whole service life
Italian-built platform insulated to 46,000 V with 16 m working height and 11 m outreach, compliant with ANSI A92.2 CAT C as adopted by the Saudi Electricity Company.
A 20 m aerial work platform mounted on a medium truck, with an articulated boom, four outriggers and a hydraulically levelled basket — for general work at height away from live conductors.
HC knuckle boom cranes in a range of capacities that fold compactly and reach behind obstacles, mounted on trucks and trailers with full body fabrication at our Riyadh workshop.
Japanese telescopic cranes with multi-stage straight booms, mounted behind the cab with a steel cargo body, hydraulic outriggers and a PTO driven from the vehicle gearbox.
A rear-loading refuse compactor fabricated entirely in our workshop and mounted on the chassis you choose, with up to 5:1 compaction and a sealed tailgate that prevents leachate leakage.
A truck-mounted vacuum road sweeper with side brushes, a water spray system for dust suppression, a hydraulically tipping debris hopper and a hand suction hose for tight spots.
A water tanker fabricated entirely at our Riyadh workshop on a truck or semi-trailer, with anti-surge baffles, a pump, hose reel, discharge valves and a top walkway with guard rails.
Steel cargo bodies fabricated entirely in-house with drop sides, a sub-frame, regulation bumpers and paint in your livery, with payload and axle loads calculated before fabrication starts.
The difference between selling equipment and delivering a working vehicle
Authorised global agencies
Authorised agents for COMET of Italy, TADANO of Japan, HC Industrie, OMFB, Bezares, ABER and Interpump. Genuine parts under factory warranty with direct manufacturer support — no commercial substitutes on safety-critical components.
A build-up workshop, not just a supplier
We fabricate the sub-frame, cargo body, tipper and tank, mount the equipment on the chassis, set up the PTO and hydraulics, and paint the vehicle in your livery. You receive a working vehicle, not a crated machine.
Calculations before cutting, not after
We calculate the remaining net payload and axle load distribution before cutting the first plate — because that is what fails trucks at technical inspection after handover.
Certified specification compliance
Our insulated platforms are rated 46 kV under ANSI A92.2 CAT C — the standard referenced in Saudi Electricity Company and Unified Contract requirements — delivered with a dielectric certificate carrying the unit serial number.
Immediate supply from Riyadh
A standing stock of knuckle cranes, man baskets, PTOs and hydraulic parts ready for delivery today, instead of waiting months for a full import cycle.
We can supply the chassis too
We build on the chassis makes listed below and can source the right new or used chassis with payload and axle loads calculated, delivered mounted and ready for work and registration.
COMET insulated basket at full 16 m working height
06Flagship product
46 kV Insulated Aerial Work Platform
The Italian C.O.M.E.T platform reaches 16 m working height and 11 m horizontal outreach. The upper boom is full fibre-reinforced polymer and the basket is insulated to 46,000 V under CAT C of ANSI A92.2 — the standard adopted in Saudi Electricity Company requirements and Unified Contract distribution projects.
270 kg basket capacity — two technicians with tools
360° continuous slewing with four outriggers
Dual controls: basket and deck stations
Factory dielectric certificate carrying the unit serial number
Condensed extracts from offers we issued to real customers — so you know in advance how we itemise scope, inclusions and delivery terms.
Power network contractorAl Qunfudah
46,000 V insulated aerial platform on a 6×4 chassis
C.O.M.E.T Italy, 16 m working height, 4 outriggers, oil pump, vibration protection — insulated basket to ANSI A92.2 per Saudi Electricity Company specification
Earthing reel with 15 m cable
Outrigger adaptation to suit the 6×4 chassis
2026 Isuzu 6×4, 24 t net payload, long wheelbase, PTO equipped
Construction contractorRiyadh
Hydraulic component — immediate supply from stock
Supply of a hydraulic crane pump — model 746
Prices quoted net; 15% VAT added and the VAT-inclusive total shown clearly on the offer
Offer validity 7 days
Every line above is supply, installation and sale — we do not rent. Customer names withheld out of respect for their privacy.
08How we work
From specification to handover in four steps
01
Specification
You send the project requirement or client tender, and our engineers review it clause by clause.
02
Technical offer
A detailed offer within one working day covering specifications, lead time, warranty and payment terms.
03
Build and mounting
We fabricate and mount at our Riyadh workshop with photographed progress at each stage.
04
Testing and handover
Full functional testing, then handover with manuals, conformity certificates and a 12-month warranty.
09Chassis
We build on every major chassis make
And we can supply the chassis itself — new or used — with net payload and axle load distribution precisely calculated before fabrication.
A question we get every week: should I buy a crane or platform, or hire one? The answer turns on how many months a year you actually operate it — here is the arithmetic.
Do you rent equipment? Is daily or monthly hire available?
No. Golden Quality Industrial is a manufacturer and supplier — we sell, fabricate and mount equipment and hand it over to you as your own property under a VAT invoice. We do not offer… Full answer
What is the difference between buying from you and hiring from a rental company?
A rental company hands you a machine it already owns for a fixed period against a fee, and takes it back at the end. We build the machine to your specification: the chassis you choose… Full answer
Can equipment be bought on instalments or financing?
Our standard payment terms are stated in each quotation: stocked equipment and parts 100% on collection; chassis-mounted builds typically 50% down payment with the order and 50% before… Full answer
Do you supply the chassis with the equipment, or the equipment only?
Both. You can bring your own chassis for us to build on, or we can source a suitable new or used truck from 14 global makes and deliver the unit mounted and ready to work. Full answer
What is the usual lead time?
Hydraulic parts and stocked equipment are delivered immediately. Units requiring fabrication and chassis mounting are typically delivered 10 to 30 working days from the purchase order… Full answer
What warranty do you provide?
The standard warranty is 12 months from delivery on every unit, covering manufacturing and installation defects. Spare parts and technical support remain available after the warranty… Full answer
Send us the specification or tender document — our engineers will review it and return a compliant technical and commercial offer within one working day.
