A rear-loading refuse compactor fabricated entirely in our workshop and mounted on the chassis you choose, with up to 5:1 compaction and a sealed tailgate that prevents leachate leakage.
For outright purchase — never rented
12-month warranty from delivery
Delivery from our Riyadh warehouse
Overview
Refuse Compactor Truck
A rear-loading refuse compactor fabricated entirely at our Riyadh workshop and mounted on the truck chassis. A high-pressure hydraulic system reduces waste volume and raises the payload carried per trip, meaning fewer runs to the landfill and lower operating cost on the contract.
The details that decide real service life are: floor plate thickness (the first area to wear), a gasketed tailgate that prevents leachate leakage, and a hydraulic ejector plate that discharges the full load without raising the body — safer than tipping under power lines. We blast and epoxy prime before the topcoat so the body survives leachate in the Saudi climate.
Technical specification
Specification — Refuse Compactor Truck
Refuse Compactor Truck
Type
Rear-loading refuse compactor
Capacity
Sized to your route and contract
Compaction ratio
Approaching 5:1 depending on waste type and moisture
System
Fully hydraulic via PTO
Discharge
Hydraulic ejector plate — full discharge without tipping
Body
High-tensile steel floor plate
Treatment
Blast cleaning and epoxy primer before topcoat
Bin lifter
Rear lifter matched to the customer's bin sizes
Key features
Why choose this?
Gasketed tailgate preventing leachate leakage
Hydraulic ejector plate for safe complete discharge
Emergency stop buttons on both rear corners
Safe riding step with a motion-inhibit switch
LED lighting and full reflective marking to traffic regulations
Paint in the municipality or contractor livery
Applications
Who uses it?
MunicipalitiesCleaning contractorsResidential and commercial compoundsFactories
From our workshop
Real photographs from our workshop and from units we delivered
Refuse compactor with the tailgate open showing the hydraulic compaction mechanismRear-loading refuse compactor under fabrication in the Golden Quality workshop, RiyadhRefuse compactor during full hydraulic discharge of the loadRefuse compactor painted in the customer livery with logo and contact detailsTwo Isuzu refuse compactor trucks ready for a cleaning contract handoverRefuse compactor body during mounting on the truck chassis
For outright purchase — not for hire.
We fabricate this unit at our Riyadh workshop, mount it and hand it over as your property under a VAT invoice with a 12-month warranty. We do not offer daily or monthly rental.
A truck-mounted vacuum road sweeper with side brushes, a water spray system for dust suppression, a hydraulically tipping debris hopper and a hand suction hose for tight spots.
A water tanker fabricated entirely at our Riyadh workshop on a truck or semi-trailer, with anti-surge baffles, a pump, hose reel, discharge valves and a top walkway with guard rails.
Twin hydraulic arms that lift an open skip from both sides onto the truck deck, with a short cycle suited to routes with many stops and to narrow streets.
Send us the specification or tender document — our engineers will review it and return a compliant technical and commercial offer within one working day.
